Stránka:roll 1931.djvu/165

Handicrafts 149 end of the baseboard. The second bridge needs no grooves or saw cuts; it is nailed between the arms on the other end of the base. The warp holder is of 4 inch stuff. It has three slots, into each of which one-third of the warp ends are firmly A. Base-board «x /2Inches of YAinch slu ff Stoyt Wire Warp Holder B babu LVL all near Bridge C Wau adil far Bridge - D t ALL parts of the Bead Loom- Complete The Loam assembled ET Selon held by plugging with one of the wooden plugs (F). This holder is nailed on the under side of the base after the first bridge is in. Now, cut your threads as before—one more than the number of beads in the width of the desired band, and about 12 inches longer than the desired length. Tie them together at one end, and fasten this bunch to the large-headed nail in your spool. Slip a thin wire nail into whichever hole on the